First, if it is the case that our center of gravity is low, the wooden box in Dongguan can only be installed on one floor and the bottom area cannot be fully utilized, it should be installed in the center of the container, and the bottom transverse direction must be fixed with square wood bars;
Second, if we meet a small wooden box when carrying out a loading, we can use the method of riding seam loading to make the Dongguan wooden box on the upper layer to press on the joint of the lower two wooden boxes, and the upper layer must be fixed or plugged;
Third, if there is a large gap at the end of the door of the box, the wooden board and wood bar must be used to fix or support it;
Fourth, many times, the center of gravity of our wooden box is relatively high, of course, if it is not enough to fix against the bottom, we must also use wooden strips to support it;
Fifth, when loading a large wooden box with special weight, it will often form concentrated load or eccentric load, so special fixing facilities must be provided to prevent the goods from contacting the front and rear end walls of the container;
Sixth, of course, what we should know is that when a box is used for a device, it is usually to use steel belt to tension, or to replace steel belt with elastic nylon belt or cloth.
1. the design of appearance structure is reasonable. When designing the wooden box structure in Guangzhou, it is necessary to pay attention to the size of the board, and the goods can be contained in, and the packing shall be tight, so as not to let the goods loose in the box. The wooden box is easy to cause damage during loading and unloading, so we must mark the position that need nail when designing the wooden box, so as to ensure the quality and structure of the wooden box is firm and reliable. And different wooden boxes should be designed according to different goods.
2. guarantee of wood. When we choose wood, we must ensure that the wood can not be cracked, corroded, mothed, etc. the thickness is about 2cm to ensure a high strength. Moreover, after the iron nail is nailed in, we should ensure that the phenomenon of nail splitting can not occur, and the vertical nail is not allowed to penetrate the board.
3. the internal structure is also important. Dongguan wooden box internal structure can not be any damage, to fix the goods in the box to reduce the surface and internal damage. The structure of wooden box in Guangzhou has a great influence on transportation. We should pay attention to whether the internal and external structure design of wood and wooden box is reasonable, so as to achieve the common safety of wooden packing box and goods and reduce unnecessary losses.
